Table of Contents
Advertisement
10
Disabling Virtual Fabrics mode
1. Connect to the physical chassis and log in using an account assigned to the admin role with
2. Enter the following command to check whether VF mode is enabled:
3. Delete all Admin Domains, as described in
4. Enter the following command to enable VF mode:
5. Enter y at the prompt.
Example
The following example checks whether VF mode is enabled or disabled and then enables it.
Disabling Virtual Fabrics mode
When you disable VF mode, the following occurs:
•
•
If you want to use Admin Domains in a fabric, you must first disable VF mode.
1. Connect to the physical chassis and log in using an account assigned to the admin role with
2. Enter the following command to check whether VF mode is disabled:
3. Delete all of the non-default logical switches, as described in
4. Enter the following command to disable VF mode:
5. Enter y at the prompt.
224
the chassis-role permission.
fosconfig --show
non-disruptively"
on page 352.
fosconfig --enable vf
switch:admin> fosconfig --show
FC Routing service:
iSCSI service:
iSNS client service:
Virtual Fabric:
Ethernet Switch Service:
switch:admin> fosconfig --enable vf
WARNING:
This is a disruptive operation that requires a reboot to take
effect.
All EX ports will be disabled upon reboot.
Would you like to continue [Y/N] y
VF has been enabled. Your system is being rebooted.
The CPs are rebooted.
If F_Port trunking is enabled on ports in the default switch, the F_Port trunking information is
deleted.
the chassis-role permission.
fosconfig --show
page 228.
fosconfig --disable vf
"Deleting all user-defined Admin Domains
disabled
Service not supported on this Platform
Service not supported on this Platform
disabled
Service not supported on this Platform
"Deleting a logical switch"
on
Fabric OS Administrator's Guide
53-1001763-02
Hide quick links:
Advertisement
Table of Contents
