Test - DAQ cPCI-FRM11 User Manual

6. Test

6.1 Receiving the image frame data
In this chapter, the functional test will be explained to discriminate board mal-functions and for
the user being familiar with the operation of the board. It is performed using the sample program
"FrmTest.exe".
Figure [6-1] shows connection of the equipments. If you have real camera or a frame source, you
can use it. At this connected state, turn the all power on and execute test program ("FrmTest.exe")
on the PC.
Follow the steps to test the function of receiving image frame data.
Step 1. : Press the "LVDS init" button to initialize the LVDS circuit and then press the "Start" button
to save Image Frame data.
[Figure 6-1. Equipment Connection for Testing]
cPCI-FRM11 User's Manual (Rev 1.1)
24
- - http://www.daqsystem.com