DAQ cPCI-FRM11 User Manual page 16

4. Installation
4.1 Package contents
In addition to the user‟s Manual, the package includes the following items. If any of these items is
missing or damaged, contact DAQ system.
- cPCI-FRM11 board
- CDROM (Drivers/Manual/API/Sample source etc.)
After unpacking, inspect the board carton to make sure there are no damages on the board.
4.2 Installation Sequence
To install your cPCI-FRM11 board in your PC, follow the steps described in the document "How
to install PCI DAQ Board" provided by DAQ System. If the document is missing, you can get it
from www.daqsystem.com. The PCIe-FRM11 board is completely Plug & Play. There are no
switches or jumpers to set. Therefore you can install it easily.
- Your OS requirement : Windows 2000 SP4 or Windows XP SP1 above
The cPCI-FRM11 connects to Express Card Port. After that you can show the below picture of
"New Hardware Search Wizard" window.
The Add new Hardware Wizard will install the driver in the following process.
cPCI-FRM11 User's Manual (Rev 1.1)
16
- - http://www.daqsystem.com