DAQ cPCI-FRM11 User Manual page 22

To run the sample application program, you need to use API, it is a form of client DLL. To compile
the sample source to make its executable file, you have to use Import Library files and header files.
You can find them in the CDROM. To run the .exe file, the API DLL file (PCI_FRM11.DLL) must
be in the same directory with the .exe file or Windows system folder. Another method is to add the
directory of API DLL file to PATH environmental variable.
5.1.1 Functions related to image Frame
(1) „DXD810/DXD1417' Combo-box
Use this box to set up the operation mode.
(2) „LVDS Init' button
Press this button to initialize the function of receiving image frame data. It is performed only
once after power is applied to the board.
(3) „Start' button
Press this button to begin to save image data from Camera Link.
(4) „FRAME Read' button
Press this button to read the image frame data of the board to your PC. If image frame data
is not saved on the board, you must wait until the end of data collection.
(5) „LVDS Close' button
Press this button to finish usage of the board and terminate the program.
(6) „Save to' button
Press this button to save the image frame data.
5.1.2 Functions related to UART
(1) „Send Serial Data' button
Press this button to send the data in the editor box to UART. You can directly write the data
in the editor box by the button.
(2) „Get Serial Data' button
Press this button to get the data on the general UART.
cPCI-FRM11 User's Manual (Rev 1.1)
22
- - http://www.daqsystem.com