3
CIMOM server configuration
FIGURE 29
Configuring log file options
You cannot configure log file options with the SMI Agent Configuration Tool. The following
procedure describes how to change the log file options by modifying the jserver.properties file.
1. Open the jserver.properties file found at ...server/jserver/bin.
2. Uncomment the following lines:
When the specified size is exceeded on the first log file, logs are written to the next log file. When
approximately the specified number of KB have been written to one log file, another log file is
opened.
NOTE
Sometimes log file will exceed the size specified because of a limitation in Java logging. After the
server is stopped, the size of the log file will be reduced to the size specified.
46
Configure the CIMOM server
# com.wbemsolutions.jserver.logdirectory=/mylogfiledir
#com.wbemsolutions.jserver.log.maxfilesize=5000000
#com.wbemsolutions.jserver.log.numfiles=3
Replace mylogfiledir with the complete path of the log file directory.
Replace 5000000 with the maximum size of the log file (in KB).
Replace 3 with the number of rotating log files.
Brocade SMI Agent User's Guide
53-1001778-01