Debugging Options For The Provider - Brocade Communications Systems 53-1001778-01 User Manual

3
Debugging and logging options configuration
4. Click Apply.
The changes take effect when you restart the server. Click Start Server to restart the server.
FIGURE 23

Debugging options for the provider

This section describes how you can update the debugging configuration. By default, debug logging
for the provider is enabled.
You can update debugging configuration dynamically or you can update the debug properties file. If
you update dynamically, your changes are effective immediately, but are not saved. If you update
the debug properties file, your changes are saved, but are not reflected until the server is restarted.
You can specify a file to be the debug properties file, or you can use the default file, which is in the
following location:
You can set the following debug options:
•
•
•
•
•
•
•
Switch Data and Switch XML Data are used internally for communication with the switch.
38
Configure debugging options for CIMOM
On Linux, Solaris, and AIX:<SMIAgent>/agent/server/jserver/bin/debug.properties
On Windows:
Exception
Operation
Event
Configuration
Switch Data
Switch XML Data
Threadlock
<SMIAgent>\agent\server\jserver\bin\debug.properties
Brocade SMI Agent User's Guide
53-1001778-01