Advertisement
Available languages
Available languages
DETECT SENS
INTERVALL
BLOCK DISP
MASK AREA
MONITOR AREA
RETURN
SYSTEM SETTING
An automatic internal synchronism system is active in this camera. The submenu which can be accessed
from this section allows several adjustments:
SYNC MODE
LENS
FLIP
LCD/CRT
CAMERA ID
Option
SYNC MODE
LENS
FLIP
LCD/CRT
CAMERA ID
RETURN
26
/
/
ON ÷ OFF
/
/
SYSTEM SETTING
INT
MANUAL
OFF
LCD
OFF
Value
INT
MANUAL
OFF ÷ V ÷ H ÷ HV
LCD
ON ÷ OFF
This defines the motion detection sensitivity threshold
value.
Moving subjects are detected when an interval of time
higher than the value of the previous motion detection
elapses.
When active, this indicates in which block motion was
detected.
This function splits the monitor into 96 zones allowing to
define an area in which motion will not be detected.
This defines a specific area of the monitor for motion
detection.
Internal only.
This option allows to select the lens type in use: always
select MANUAL only.
This defines the sense of rotation of the frame: from top
down, from left to right, by 180° .
This selects the monitor mode.
This option allows to assign a name to the camera using
up to 64 characters (see below).
Explanation
DS1092-171
Advertisement
