Table of Contents
Advertisement
Safety system of your vehicle
Height adjustment
You can adjust the height of the
shoulder belt anchor to one of the
four different positions for maximum
comfort and safety.
The shoulder portion should be
adjusted so it lies across your chest
and midway over your shoulder near-
est the door, not over your neck.
■
Front seat
To adjust the height of the seat belt
anchor, lower or raise the height
adjuster into an appropriate position.
To raise the height adjuster, pull it up
(1). To lower it, push it down (3) while
pressing the height adjuster button (2).
Release the button to lock the anchor
into position.
2-24
Try sliding the height adjuster to make
sure that it has locked into position.
To release your seat belt:
Press the release button (1) in the
locking buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen,
OAD035027
check the belt to be sure it is not twist-
ed, then try again.
Rear center seat belt
OHSS038103
When using the rear center seat belt,
the buckle with the "CENTER" mark
must be used.
i
Information
If you are not able to pull out the safe-
ty belt from the retractor, firmly pull
the belt out and release it. After
release, you will be able to pull the belt
out smoothly.
OAD035028
Advertisement
Chapters
Table of Contents
