Table of Contents
Advertisement
i
Information
• During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will acti-
vate after approximately 3 seconds.
This delay is normal.
• Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. Depress the brake
pedal at least once after turning ON
the ignition or starting the vehicle.
To set Cruise Control speed
■ Type A
■ Type B
1. Press the CRUISE (
on the steering wheel to turn the
system on. The
cator will illuminate.
2. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
i
Information
- Manual trans-
mission
For manual transmission vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
3. Push the toggle switch down
OAD058134L
(SET-), and release it. The SET
) button
indicator or set speed on the LCD
display will illuminate.
indi-
4. Release the accelerator pedal.
i
Information
On a steep slope, the vehicle may
slightly slow down or speed up, while
driving uphill or downhill.
OAD058135N
5
5-113
Advertisement
Chapters
Table of Contents
