Hyundai Elantra 2019 Owner's Manual page 175

2) When the High Beam Assist
camera is adversely affected
by an external condition. Such
examples may include:
•
When the vehicle's head-
lamps have been damaged or
not repaired properly
•
When the vehicle headlamps
are not aimed properly
•
When the vehicle is driven on
a narrow curved road or rough
road
•
When the vehicle is driven on
an uphill road or downhill
road
•
When only part of the vehicle
in front is visible on a cross-
road or curved road
•
When there is a traffic light,
reflecting sign, flashing sign
or mirror
•
When the road conditions are
bad such as being wet or cov-
ered with snow
•
When a vehicle suddenly
appears from a curve
•
When the vehicle is tilted from
a flat tire or being towed
•
When the Lane Keeping
Assist (LKA) system warning
light illuminates
•
When the light from the
oncoming or front vehicle is
not detected because
exhaust fume, smoke, fog,
snow, etc.
•
When the front window is cov-
ered with foreign matters
such as ice, dust, fog, or is
damaged
3) When the forward visibility is
poor. Such examples may
include:
•
When the headlamps of an
oncoming vehicle or a vehicle
in front is not detected due to
poor outside visibility (smog,
smoke, dust, fog, heavy rain,
snow, etc.)
•
When the windshield visibility
is poor
WARNING
•
Do not attempt to disassemble
the front view camera without
the assistance of an authorized
HYUNDAI dealer technician.
If camera is removed for any
reason, the system may need
of
to be re-calibrated. We recom-
mend that the system be
inspected by an authorized
HYUNDAI dealer.
•
If the windshield of your vehi-
cle is replaced, most likely the
front view camera will need to
be re-calibrated. If this occurs,
have your vehicle inspected
and have the system re-cali-
brated by an
HYUNDAI dealer.
•
Be careful that water doesn't
get into the High Beam Assist
(HBA) unit and do not remove
or damage related parts of the
High Beam Assist (HBA) sys-
tem.
3
authorized
3-97