Product Illustration - NETGEAR EN308TC Installation Manual

All manuals and user guides at all-guides.com

Product Illustration

Product Illustration
Front Panel
The front panel of the Model EN308
activity status of the hub.
For ease of use, the front panel 10BASE-T LEDs that indicate link, receive, or
partition activity are duplicated on the 10BASE-T ports on the rear panel. Use
the rear panel LEDs when setting up the device, and use the same LEDs on the
front panel for monitoring the ports when the hub is positioned in place and set
up.
PWR
(Power)
LED
8
PORT
Ethernet Hub
10 Mbps
PWR
Front Panel LEDs
The table below describes the activity of the front panel LEDs.
Label Color
Pwr (Power) Green
Col (Collision) Amber
10BASE-T
LEDs Green
Link/Receive
(For ports 1
through 8)
Partition Amber
BNC LEDs
Rx Green
Partition Green
Model EN308
TC
hub contains LEDs that monitor the
COL
10BASE-T
(Collision)
LEDs
LED
On=Link, Blinking=Receive
1 2 3 4 5
Partition
COL
Activity Description
On Power is supplied to the hub.
Blinking Data collision is occurring on the network. Note
that occasional collisions are normal.
On The link between this port and the connected
port is good.
Blinking There is incoming data on the port.
On The port is partitioned because of excessive
collisions.
Blinking There is incoming data on the BNC port.
On The BNC port is partitioned because of
excessive collisions.
TC
Ethernet Hub Installation Guide
BNC Rx
LED
EN308TC
MODEL
Rx
6 7 8
Partition
BNC Partition
LED
9117FA