Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Rear Panel
The rear panel of the Model EN308
BNC port that you can use to connect to a backbone network or other PCs using
thin coaxial cable, and a Normal/Uplink push button.
The rear panel also includes a DC power receptacle.
Normal/Uplink
push button
100M
10M
Normal/Uplink
8
7
6
5
4
3
10BASE-T
ports
RJ-45 10BASE-T Network Ports with Built-in LEDs
Two LEDs—the Link/Rx (Receive) LED and the Part (Partition) LED—are
built into each 10BASE-T port.
The table below describes the activity of the LEDS.
Label
Color
Link/Rx
Green
(Located in the top
left corner of each
10BASE-T port)
Part
Amber
(Located in the top
right corner of each
10BASE-T port)
Model EN308
TC
hub has eight RJ-45 10BASE-T ports, a
BNC port
On = Link Blinking = Activity
BNC
2
1
Link/Rx
Part
(Receive)
(Partition)
LED
LED
8724EC
Activity Description
On
The link between this port and the connected
port is good.
Blinking
There is incoming data on the port.
Blinking
The port is partitioned because of excessive
collisions.
TC
Ethernet Hub Installation Guide
Power receptacle
100-240 VAC, 50-60Hz 0.2A max.
9118FA
Advertisement
Table of Contents
