Product Illustration - NETGEAR FS2105 Installation Manual

Introduction
™
The NETGEAR
Model FS2105 Fast Ethernet Switch
simplify 10/100 megabits per second (Mbps) switching technology so that
Switch
small businesses can enjoy the same high-performance networking facilities that
the corporate users enjoy. These switches boost network throughput, while
preserving your investment, so that there is no need to replace installed cabling,
desktop software, or hardware.

Product Illustration

Front Panel of the Model FS2108 Switch
8 Port
FAST ETHERNET SWITCH
MODEL FS2108
Rear Panel of the Model FS2108 Switch
Uplink
Port 8 Uplink
Note:
The Model FS2105 Fast Ethernet Switch is similar to the Model FS2108 Fast
Ethernet Switch, with the exception of three fewer RJ-45 ports and LEDs.
LEDs
This table describes the activity for LEDs on either the
Model FS2108 switch.
Label Color Activity Description
Pwr Green On
(power)
Off
Link/ Green On
ACT
Blinking
100M Green On
Off
FDX Green On
Off
Model FS2105/FS2108 Fast Ethernet Switch Installation Guide
Link/Activity LEDs
LINK/ACT
PWR 1 2 3 4 5 6 7 8
100M
FDX
10/100 Network ports
110V 3A MAX
8 7 6 5 4 3 2 1 PWR
Port 8 Normal Power
input
Power is supplied to the switch.
Power is disconnected.
Port connection is good.
This port is receiving or transmitting data.
This port is operating at 100 Mbps.
This port is operating at 10 Mbps.
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
and
Model FS2108 Fast Ethernet
100M LEDs
FDX LEDs
9608FA
Model FS2105 switch or the