How To Use The Glass Drier; Daily Operation - CPI STEMSHINE Operating Instructions Manual

The purpose of your "Stemshine" unit is to provide your clients with luminous, spot-free
stemware. It accomplishes this feat through the synthetic, easy to clean heated
brushes.

DAILY OPERATION:

 Ensure the glass drier is placed in a location where the operator will find it
comfortable to operate.
 Insert the plug into the nearest socket.
 Press the "Power" button located on the front of the dryer to start
up the machine.
a. The button will illuminate indicating there is power to the
unit.
b. The brushes will begin to rotate
c. The calrod element heats up
d. The fan will begin to circulate increasingly warm air around
the brushes.
Before using the glass polisher, warm the brushes for at least 10 – 15
WARNING: Ensure that no objects get caught in the rotation of the brushes.
 Remove clean, wet glasses directly from the glass washer
Wear the specialized CPI "dimpled" polishing
gloves. Lift the glass(es) and place on one of the
two middle brushes. Form a circle with your
thumb and fore-finger and encircle the stem of the
glass – the "OK" grip. This "OK" grip should only
be used to balance the glass -- the glass should
rotate slightly on the brushes.
CPIGP8AOPINST

HOW TO USE THE GLASS DRIER

Place the glass over one of the MIDDLE brushes
and gently guide the stem of the glass. Gently
rock the glass back and forth, side to side, for
approximately 3 to 4 seconds.
Page - 10
minutes.
SALES + SERVICE
(866) 912-3469
WWW.CPISHINE.COM