Daily Cleaning - CPI STEMSHINE Operating Instructions Manual

The glass polisher needs to be cleaned on a daily basis.
1. Turn the machine off and unplug it.
2. Remove the brushes as follows:
3. Place the brushes evenly on the flat rack or dish rack of your dishwasher (either laying
down or standing up). Ensure they do not overlap one another.
4. Run them through a regular wash cycle in your high temperature dishwasher - TWICE.
5. After the second regular wash cycle is complete, rinse the brushes with plenty of fresh
water to remove soap and chemical that is applied during the wash cycle.
6. Allow the brushes to drip dry overnight on the rack.
7. In the morning, place the brushes back onto the coloured coded spindles matching the
colours of the brush to the colour on the spindle. Turn the brush in a clockwise direction to
lock in place. Be sure that the brushes are correctly inserted onto the spindles.
8. After all brushes are placed on the spindles / support, plug in the machine and turn the
power on. Run for approx. 20-30 minutes or until dry.
WARNING: Do not place the
electrical parts that could be damaged and cause
switched back on.
CPIGP8AOPINST

DAILY CLEANING

To remove the brush from the support, rotate the brush in a
counter clockwise direction while gently pulling it u pwards.
Remove the brush completely by slipping it off its support.
drier in a container wi th water because it
glass
Page - 12
electric shock to the operator once it is
WWW.CPISHINE.COM
contains
SALES + SERVICE
(866) 912-3469