CPI STEMSHINE Operating Instructions Manual page 24

CLEANING INSTRUCTIONS TO BE DONE DAILY
. In order to clean the glass polisher, turn the unit off and unplug it.
1
. Remove the brushes from the support
2
by rotating the brush in a counter
clockwise direction and gently pulling the
brush upwards.
Place the brushes evenly on the flat rack or dish rack of your dishwasher (either by laying down or
4.
standing them up) -- being sure that they are NOT overlapping.
. Run them through the regular wash cycle in your on premise, high temperature dishwasher.
5
When the regular wash cycle on your dishwasher is complete, place the brushes back onto the
6.
colored spindles.
Replace the brushes on their color coded supports
7.
(red, green and yellow). Turn the brush in a clockwise
direction to lock in place. Be sure that the brushes are
correctly inserted onto the spindles.
After all brushes have been placed on the
8.
supports, plug in machine and turn power on. Run
for approximately 15 to 30 minutes or until dry.
Turn power Off.
9.
. Replace dust cover.
10
QUICK START OPERATING
PROCEDURES FOR "STEMSHINE" -
THE GLASS POLISHER
Remove the brush completely
3.
by slipping it off its support
Dust Cover
Power 'On/Off'
www.cpishine.com
T: 866-912-3469
2