Brush Changeout Procedures - CPI STEMSHINE Operating Instructions Manual

BRUSH CHANGEOUT PROCEDURES :

Approximately once per year, the brushes should be replaced due to normal wear and tear. This is an
easy task to accomplish. Procedures follow.
The GP8 is equipped with 8 colour coded brushes – 3 red; 2 green and 3 yellow. The brushes are
comprised of a very durable, absorbent polystyrene. They were designed with two parts – the base
brush and then an interchangeable tip. This tip will essentially double the life of the brush.
Whether you are changing out an entire brush or replacing just a "tip" proceed as follows:
Ensure the unit has been turned off and is unplugged.
Remove the brush from the support by rotating the brush in a counter
clockwise direction while gently pulling it upwards.
Remove the brush completely by slipping it off its support.
Page - 16 SALES + SERVICE
CPIGP8AOPINST (866) 912-3469
WWW.CPISHINE.COM