Lockoutput; Unlockoutput; Analog Audio Output Settings; Volumesetting(Db) - Lightware HDBaseT HDMI-TPS-RX110AY User Manual


  
7.LW3Programmers'Reference
7.7.9. Lock Output
Command and Response #lock
ç CALL·/MEDIA/AUDIO/XP:lockDestination(<out>)
æ mO·/MEDIA/AUDIO/XP:lockDestination
Example
ç CALL/MEDIA/AUDIO/XP:lockDestination(O1)
æ mO/MEDIA/AUDIO/XP:lockDestination
7.7.10. Unlock Output
Command and Response #unlock
ç CALL·/MEDIA/AUDIO/XP:unlockDestination(<out>)
æ mO·/MEDIA/AUDIO/XP:unlockDestination
Example
ç CALL/MEDIA/AUDIO/XP:unlockDestination(O1)
æ mO/MEDIA/AUDIO/XP:unlockDestination
7.8. Analog Audio Output Settings
7.8.1. Volume Setting (dB)
Command and Response #analogaudio #volume
SET·/MEDIA/AUDIO/<out>.VolumedB=<level>
ç
pw·/MEDIA/AUDIO/<out>.VolumedB=<level>
æ
Parameters
<level> Setstheoutputvolume(attenuation)between-95.625dBand0dBinstepof-0.375dB.The
value is rounded up if necessary to match with the step value.
Example
ç SET/MEDIA/AUDIO/O2.VolumedB=-15
æ pw/MEDIA/AUDIO/O2.VolumedB=-15.00
HDMI-TPS-RX110AYseries–User'sManual
7.8.2. Volume Setting (dB) in Steps
Command and Response
CALL·/MEDIA/AUDIO/<out>.stepVolumedB(<step>)
ç
æ mO·/MEDIA/AUDIO/<out>.stepVolumedB
Parameters
<level>
Example
ç CALL/MEDIA/AUDIO/O2.stepVolumedB(5)
æ mO/MEDIA/AUDIO/O2.stepVolumedB
7.8.3. Volume Setting (Percent)
Command and Response
SET·/MEDIA/AUDIO/<out>.VolumePercent=<percent>
ç
pw·/MEDIA/AUDIO/<out>.VolumePercent=<percent>
æ
Parameters
<level>
Example
ç SET/MEDIA/AUDIO/O2.VolumePercent=50
æ pw/MEDIA/AUDIO/O2.VolumePercent=50
7.8.4. Volume Setting (Percent) in Steps
Command and Response
CALL·/MEDIA/AUDIO/<out>.stepVolumePercent(<percent>)
ç
æ pw·/MEDIA/AUDIO/<out>.stepVolumePercent
Parameters
<level>
Example
ç CALL/MEDIA/AUDIO/O2.stepVolumePercent(15)
æ mO/MEDIA/AUDIO/O2.stepVolumePercent
Appliedfirmwarepackage:v1.5.0b3 | LDCsoftware:v2.5.9b2
Setstheoutputvolume(attenuation)between-95.625dBand0dBinstepof-0.375dB.The
value is rounded up if necessary to match with the step value.
Sets the output volume (attenuation) between 100% and 0%, in step of 1%. The value is rounded
up if necessary to match with the step value.
Sets the output volume (attenuation) between 100% and 0%, in step of 1%. The value is rounded
up if necessary to match with the step value.
91