Mirrors
5
Adjusting mirrors
46
Turn the mirror to the desired
z
position.
Adjusting mirror arm
Push protective cap 1 for the
threaded fastener up on the
mirror arm.
Slacken locknut 2.
Turn the mirror arm to the ap-
propriate position.
Tighten the locknut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Right mirror (lock nut) to
adapter
22 Nm (Left-hand thread)
Left mirror (lock nut) to
adapter
22 Nm
Push protective cap 1 over the
threaded fastener.
Headlight
Adjusting headlight for
driving on left/driving on
right
This motorcycle has a
symmetric-beam low-beam
headlight. If the motorcycle
is ridden in a country where
the opposite rule of the road
applies, its symmetric low-
beam headlight means that
no measures are necessary to
prevent the headlight beam from
dazzling oncoming traffic.