Socket Installation; Care And Maintenance - pro.point 8306052 User Manual

8306052 1/2 IN. DR MAINTENANCE FREE AIR IMPACT WRENCH

SOCKET INSTALLATION

1. Turn off the air compressor and disconnect the air hose
when changing sockets.
IMPORTANT! The working torque of the impact wrench is
500 ft-lb. Make sure that the nut or bolt you are using the tool
to tighten can withstand the rated torque and is rated for
7,000 RPM or greater. If available, check the recommended
torque specifications for the nut.
2. Select the appropriately sized 1 /2 in. drive impact socket
for the job. Only use impact sockets which are specifically
designed for use with an impact wrench. Do not use worn
or damaged sockets.
3. Push and snap the socket (not included) onto the anvil.
4. Attach the air hose and turn the air compressor on.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply
cord periodically. Have damaged or worn components
repaired or replaced by an authorized technician. Only use
identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at
all times.
6. Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
10 For technical questions call 1-800-665-8685
V1.0