Canon RC-IP100 User Manual page 6

Camera Operation Screen
B
C
D
E
F
G
H
I
.
A Function Group Button
Assigns a combination of the preconfigured functions as a
function group to a button or knob.
(A P10 "Adjusting Using Function Group Buttons")
0 White Balance
0 Black Balance
0 Black R/B
0 Speed
0 Exposure/Focus
B [F1]
The function assigned to the F1 knob can be configured.
The default function assigned is "Focus".
C [USER1]
The function assigned to the USER1 button can be
configured.
The default function assigned is "One Shot AF".
D [F2]
The function assigned to the F2 knob can be configured.
The default function assigned is "Iris".
E [USER2]
The function assigned to the USER2 button can be
configured.
The default function assigned is "Shooting Mode".
F [F3]
The function assigned to the F3 lever can be configured.
The default function assigned is "None".
G [F4]
The function assigned to F4 knob can be configured.
The default function assigned is "PT Speed/None".
H [SETTINGS]
Tap the button to display the SETTINGS screen.
Name of Parts
6
A
I [CAM Group]
The camera group can be altered using the left/right buttons.
J [CAM Number]
The camera number can be altered using the left/right
buttons.
K [ENTER]
For use in the [STORE] mode and [DELETE] mode. Can be
used to confirm and delete the preset number.
L [Preset No./Preset Group] button
A preset number or preset group can be selected.
To change the preset group, tap the [Group] button. While
the button is lit, tap one of the Preset Group buttons (1 to 10)
to change the preset group. Tap the [Group] button again.
When the light of the button goes off, the preset number can
be changed.
M [Camera No./Camera Group] button
A camera number or camera group can be selected.
To change the camera group, tap the [Group] button. While
the button is lit, tap one of the Camera Group buttons (1 to
10) to change the camera group. Tap the [Group] button
again. When the light of the button goes off, the camera
number can be changed.
Tally light status
PGM : Red
PST : Green
Cameras that are disconnected are indicated by a
Memo :
0 Up to 10 cameras can be configured to one camera group.
0 Up to 10 camera groups can be registered and a total of up
to 100 cameras can be configured.
U
T
S
R
Q
P
O
N
M
L
K
J
icon.