Adjusting The Camera Functions; Adjusting Using Function Group Buttons; Adjusting Using Camera Control; Adjusting Using Func - Canon RC-IP100 User Manual

Remote camera controller
Hide thumbs

Advertisement

Table of Contents
Adjusting the Camera
Functions

Adjusting Using Function Group Buttons

1 Tap the Function Group button.
Functions with a preconfigured combination are assigned to
the buttons and knobs.
For example, by tapping the [White Balance] button, the
[USER1] button can be used to toggle the white balance
setting between "AWB"/"Daylight"/"Tungsten"/"Kelv"/
"Manual"/"SetA"/"SetB".
Tapping the selected Function Group button again clears the
function group selection.
Function Group Button
White Balance
Black Balance
Black R/B
Speed
Exposure/Focus
2 To change the function, tap the corresponding
button on the operation panel to select a function,
followed by tapping the [ENTER] button.

Adjusting Using CAMERA CONTROL

1 Select a camera to operate.
(A P8 "Selecting a Camera")
2 Tap the [CAMERA CONTROL] tab.
3 Adjust the Functions.
The adjustable items are as follows. Note that some items
might not be adjustable depending on the camera that is
connected.
[White Balance], [Gain], [Shutter], [Iris] (AUTO ON/OFF),
[Focus] (AUTO ON/OFF), [ND], [Sharpness]

Adjusting the Camera Functions

10
Default Setting
F1: WB R:Gain, F2: WB
B:Gain, F3: None, F4: PT
Speed/None, USER1: White
Balance Mode, USER2: WB
Calibration
F1: Master Pedestal, F2: Black
Gamma Level, F3: None,
User1: None, User2: None, F4:
PT Speed/None
F1: Master Black R, F2: Master
Black B, F3: None, User1:
None, User2: None, F4: PT
Speed/None
F1: Focus Speed, F2: Zoom
Speed, F3: None, User1:
None, User2: None, F4: PT
Speed/None
F1: Focus, F2: Iris, F3: None,
User1: One Shot AF, User2:
Shooting Mode, F4: PT Speed/
None

Adjusting Using FUNC

1 Select a camera to operate.
(A P8 "Selecting a Camera")
2 Tap the [FUNC] tab.
3 Adjust the Functions.
If the function you want to select is not displayed, tap
to jump to the next page.
The adjustable items are as follows. Some menus items may
not be adjustable depending on the camera that is
connected.
Digital Zoom, D.Tele-Converter, Soft Zoom Control, PT
Acceleration, Image Stabilizer, Focus limit, AF Mode, Face
Detection AF, AF Speed, AF Response, AWB Response, AE
Response, ND Filter Mode, Auto Slow Shutter, Flicker
Reduction, IR Cut Filter, Wiper, Washer, AUX1, AUX2,
AUX3, AUX4

Tracing

Recording Camera Operations (Tracing)

1 Select a camera to operate.
(A P8 "Selecting a Camera")
2 Tap the [STORE] button on the operation panel.
3 Tap the [TRACE] tab and select a number.
4 Tap the [Start Rec] button and operate the
camera.
5 Tap the [Stop Rec] button to register the
operations.
Memo :
0 This function is only supported on IP cameras.
0 Tapping the [Cancel] button while recording is in progress
erases the trace record.

Playing Camera Operations (Tracing)

1 Select a camera to operate.
(A P8 "Selecting a Camera")
2 Tap the [VIEW] button on the operation panel.
3 Tap the [TRACE] tab and select a number.
4 Tap the [Prepare Trace] button to shift to the
position to start tracing.
5 Tap the [Execute Trace] button to execute tracing.
Memo :
0 Tapping the [Cancel] button stops the tracing process.
0 Selecting the number in the [DELETE] tab and tapping
[ENTER] erases the recorded trace.

Advertisement

Table of Contents
loading

  Also See for Canon RC-IP100

  Related Content for Canon RC-IP100

Table of Contents