Table of Contents
Advertisement
Troubleshooting
Problem
The appliance does not start or
suddenly stops
Blocking the knife or mixer
Overheating smell
The bowl does not heat up
Technical specifications:
Model: .......................................................MKM2200
Rating Power :........................220-240V 50Hz 1400W
Heating Power :...............................................1000W
Motor Power :...................................................1000W
Compliance
This product has been fully tested and meets all requirements as set out by standards AS/NZS
60335.1, AS/NZS60335.2.14 and AS/NZS60335.2.15.
Responsible disposal
At the end of its working life, do not throw this appliance out with your household rubbish.
Electrical and electronic products contain substances that can have a detrimental effect on the envi-
ronment and human health if disposed of inappropriately. Observe any local regulations regarding the
disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.
Cause
Incorrect assembly
Too many or too large pieces of
the processed food
Warming up of the parts during
the first start-up
Overload
The bowl thermal control has
tripped
21
Solution
Assemble the appliance cor-
rectly
Do not exceed the permitted
capacity of the bowl, cut the
food into smaller pieces
It is a normal phenomenon
which will cease to exist in the
future
Turn off the appliance, wait for
it to cool down Do not exceed
the recommended operating
times
Reset the thermal control
Advertisement
Table of Contents
