How To Set The Time - Mistral MKM2200 Instruction Manual

HOW TO SET THE TIME

Set the second
Use finger touch the seconds '00' field first,
(1) Then put finger on the timer field, slide the
dial clockwise or anticlockwise to adjust the
seconds.
or
(2) Turn the control knob clockwise or
anticlockwise to adjust the seconds.
Set the minutes
Use finger touch the minutes '00' field first,
(3) Then put finger on the timer field, slide the dial
clockwise or anticlockwise to adjust the minutes
or
(4) Turn the control knob clockwise or
anticlockwise to adjust the minutes.
HOW TO SET THE SPEED
Use finger touch the speed field first,
(1) Then put finger on the speed field, slide the dial
clockwise or anticlockwise to adjust the speed.
or
(2) Turn the control knob clockwise or
anticlockwise to adjust the speed.
NOTE: if the temperature is set, the speed
level can only be set from 1 to 3.
Reverse:
If speed level is lower than '3', use finger touch
the icon under the level to change the blade to
Reverse.
Touch it again to change it to clockwise.
Note: Reverse function is only available
for speed level lower than 3.
Touch this icon
to change the
blade running
direction
14
HOW TO SELECT THE OPERATOIN MODE
At Manual mode, use finger slide the screen
rightward or touch the left dot on right-bottom
corner of the dispaly to enter Recipe mode.
Finger slide slide the screen leftward or touch the
right dot on right-bottom corner of the display to
enter Automatic Programmes mode.
Touch this dot to enter Recipe mode
Touch this dot to enter Automatic
Programmes mode
Recipe Mode
After enter the recipe mode, select your desired
recipe, then follow the instruction step by step to
start the cooking process.
Automatic Programmes Mode
After enter the Automatic Programmes mode,
there are 8 program options.
KNEAD:
Place the stir paddle on the drive shaft, then add
the ingredients as per recipe into the bowl, press
the Start icon, the machine will start kneading at
speed level 3 or 2 in clockwise or anticlockwise.
Note: advise kneading the dough at
Automatic Programmes mode for good
performance. Never set the speed over
level '3' during kneading.