Repair Procedures - Daikin Stylish Series Service Manual

2 | Components

2.4.2 Repair procedures

To remove the front panel motor
To install the front panel motor
Service manual
62
Pins
2-3
2-4
2-5
3-4
3-5
4-5
Front panel motor resistance
measurements are correct?
Yes
No
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 Remove the 2 screws and remove the front panel motor from the indoor unit.
a Screw
b Front panel motor
2 Disconnect the harness from the front panel motor.
3 To install the front panel motor, see
1 Connect the harness to the front panel motor connector.
2 Install the front panel motor on the indoor unit and tighten using the 2
screws.
Measured resistance (Ω)
470
Action
Return to the troubleshooting of the
specific error and continue with the
next procedure.
Replace the front panel motor, see
"2.4.2 Repair
b a
a
"2.4.2 Repair
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
4
procedures" [ 62].
4
"2.13 Plate work" [ 99].
4
procedures" [ 62].
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02