Maserati Ghibli 2021 Owner's Manual page 88

Dashboard Instruments and Controls
• Projection Mode: Apple CarPlay and
Android Auto (text label only)
Key-On Display
• On
• Off
Key-Off Display
• On: Trip summary
• Off: screen with Maserati logo and
trident
Defaults
• Restore
• Cancel
4
Scroll with the switch in the
arrow directions to view the selectable
items (in the example "Time" is
selected). A check mark will remain
next to the previously-selected item
until a new selection is made.
Press and release the multifunction
switch to select an item. The
notification of setting saved appears
as a popup for 2 seconds, then the
84
display will show the last-modified
item.
Press and release the
or
return to the "Screen Setup" submenu.
"Screen Setup" submenu parameters
set by the user as the ones to be
displayed are also indicated in the top
part of the MIA (see example in the
figures).
As for the instruction line "MPH km/h
Display", you can either select to
display it in sector 6 or not ("Off"
button to
option). In the latter case, the function
of changing units remains in any case
active.
If the "Main Menu Navigation" is set
to "On", navigation information will
be displayed in the main area of the
display only if a destination has been
set on the navigator of the MIA. If
function is set to "Off", the navigation
information will not be displayed.
"Key-On Display" and "Key-Off
Display" items allow user to set display
during vehicle key-on and off.
"Key-On Display" is normally set to
"On". When entering the vehicle,
after the welcome screen, the display
will show the information concerning
engine starting sequence. While if
it is set to "Off" (example shown in
figure), the display will show the