Maserati Ghibli 2021 Owner's Manual page 241

• The performance of TSA depends
on the update degree of navigation
system's maps.
Customised Settings
TSA is configurable by the customer
regarding the display mode on the
instrument cluster and the warning
sensitivity.
Entering "Vehicle" page on MIA
display and select the "Traffic Sign
Assist" soft-key of the "Settings" menu
to enter the setting page.
The check mark on the "Warning
Mode" box indicates that the warning
function is active.
The display of the traffic signs can be
blinking or static.
The system can be set to display the
traffic signs when the speed of the
vehicle is equal to the speed limit
allowed, or when it is higher than 5 or
10 MPH (5 or 10 km/h).
Signs Monitoring on
Instrument Cluster
If TSA function is set and a sign or a
speed limit is detected, the related
icons are displayed in the upper area
of the instrument cluster beside of the
main menu number and scroll arrows.
The display area is divided in two
different sectors:
1. Conditioned speed limit area.
2. Unconditioned speed limit area.
Driver Assistance Systems
NOTE:
Overtaking restriction signs are not
displayed by the system.
If "Blinking On" warning mode is set,
when the visual warning is provided
only the unconditioned speed limit (in
sector 2) will start blinking when the
vehicle speed exceeds to the detected
unconditioned speed limit ("+0 MPH"
or "+0 km/h" option) or when it
exceeds the set sensitivity value ("+5
MPH" - "+5 km/h" or "+10 MPH" -
"+10 km/h" options). If the vehicle
speed stays above the unconditioned
speed limit for several seconds the
unconditioned speed limit sign will
stop blinking because the manoeuvre
is evaluated as intentional. If the TSA
is not able to determine any kind of
valid speed limit neither from camera
nor from digital maps the following
image will be shown in sector 2.
6
237