Safety While Working; Disassembly And Assembly - Parsun F4BM Service Manual

7. Give a strong pull to start the engine. Repeat if necessary.
To prevent the danger or accidents when performing maintenance and repair, and improve the work
efficiency, please obey the following safety procedures.
1. FIRE PREVENTION
Gasoline (petrol), lubricant and grease are highly flammable. While working, keep away from
heat, sparks and open flames.
2. VENTILATION
Petroleum vapor and engine exhaust gases are violent in toxicity. They are harmful to breathe
and deadly if inhaled in large quantities. When test-running an engine indoors, maintain good
ventilation.
3. SELF-PROTECTION
Protect your eyes with suitable safety glasses or safety goggles, when drilling, grinding or
operating air compressor. Protect hands and feet by wearing protective work clothes, safety
gloves and shoes if necessary.
4. LUBRICANTS AND SEALING FLUIDS
When performing maintenance procedures and repair to Parsun outboards, use only products
provided or recommended by our Company.
Under normal conditions of use, there should be no hazards from the use of the lubricants
mentioned in this manual, but safety is all-important, and by adopting good safety practices, any
risk is minimized.
A summary of the most important precautions is as follows:
○ 1 To protect the skin, the application of a suitable barrier cream to the hands before working is
recommended.
○ 2 Clothing which has become contaminated with lubricants should be changed as soon as
practicable, and washed before further use.
○ 3 Avoid skin contact with lubricants.
○ 4 Hands and any other part of the body which have been in contact with lubricants or
lubricant-contaminated clothing, should be thoroughly washed with hot water and soap as
soon as practicable.
○ 5 A supply of clean lint-free cloths should be available for wiping run-off lubricants or grease.
5. GOOD WORKING PRACTICES
○ 1 Follow the tightening torque instruction. When tightening bolts, nuts and screws, tighten
the large sizes first, and tighten inner-positioned fixings before outer-positioned ones.
○ 2 Use the recommended special tools to protect parts from damage. Use the right tool in the
right manner.
When disassembly and assembly, please follow the following principles:

SAFETY WHILE WORKING

DISASSEMBLY AND ASSEMBLY

3
https://www.boat-manuals.com/