4. Remove cotter pin and friction adjusting bolt.
5. Remove steering handle.
6. Remove throttle cable.
7. Remove throttle lever stay and throttle lever.
8. Remove engine stop switch.
9. Inspect if steering handle is cracked or damaged. Replace if necessary.
10. Inspect if bush, bush washer and wave washer are cracked or damaged.
necessary.
11. Inspect if steering handle shock damper is cracked or damaged. Replace if necessary.
Inspect if throttle cable is cracked or damaged. Replace if necessary.
12.
13. Inspect the conduction of engine stop switch. If not to specification, replace it.
Remove lockplate:
Install lockplate:
Push stop switch button: Conducting
Conducting
Not conducting
67
https://www.boat-manuals.com/
Replace if