TRBL
SHTG
Troubleshooting
Yamaha Diagnostic System
Introduction
Hardware requirements
Make sure that your computer meets the following requirements before using this software.
Computer:
Operating system:
CPU:
Memory:
Hard disk free space: 20 MB or more (40 MB or more recommended)
Drive:
Display:
Mouse:
Communication port: RS232C (Dsub-9 pin) port
Printer:
NOTE:
• The amount of memory and the amount of free space on the hard disk differs depending on the
computer.
• Using this software while there is not enough free space on the hard disk may cause errors and
result in insufficient memory.
• This software may not run properly on some laptop computers.
Getting started
This section provides information on installing the Yamaha Diagnostic System under Windows 95,
Windows 98, Windows Me, or Windows 2000.
Installing the Yamaha diagnostic system under Windows 95, Windows 98, Windows
Me, or Windows 2000
NOTE:
• Before installing the Yamaha Diagnostic System, check that your computer meets the specified
requirements. For detailed information on the system requirements.
• It is strongly recommended that you exit all other programs before running the installer.
1. Turn on your computer and start up Windows 95, Windows 98, Windows Me, or Windows 2000.
2. Insert the compact disc into the computer's CD-ROM drive.
33
IBM-compatible laptop computer
Microsoft Windows 95, Windows 98, Windows Me or Windows 2000
(English version)
i486DX, 100 MHz or higher (Pentium 100 MHz or higher recommended)
16 MB or more (32 MB or more recommended)
CD-ROM drive
×
VGA (640
480 pixels), VGA/SVGA (800
×
XGA (1024
768 pixels)
256 or more colors
Compatible with the operating system mentioned above
Compatible with the operating system mentioned above
https://www.boat-manuals.com/
×
600 pixels),
9
60L3D1X