ResMed VPAP ST Information Manual page 8


Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.

The electrical connector end of the heated air tubing is only compatible with the H5i air outlet
and should not be fitted to the device or mask.

When using the SlimLine or ClimateLine above 20 cm H
may not be reached if used with an antibacterial filter. The device performance must be checked
prior to prescribing the SlimLine for use with an antibacterial filter.

The ClimateLine or ClimateLine
Humidifier performance
The following settings have been tested at 22°C ambient temperature:
Mask pressure
cm H O
2
3
10
20
25
a. AH - Absolute Humidity in mg/L.
b. BTPS - Body Temperature Pressure Saturated.
Pneumatic flow path
8
is designed only for use with the H5i.
MAX
RH output %
Setting 3
90
95
95
100
1. Inlet filter
2. Blower
3. Air tubing
4. Mask
O, the device optimum performance
2
Nominal system output AH
Setting 6
100
100
100
100
Setting 3
10
11.5
11
12
a b
, BTPS
Setting 6
18
21
18
13.5