SATO RWG500 Quick Manual
  1. Manuals
  2. Brands
  3. SATO Manuals
  4. Barcode Reader
  5. RWG500
  6. Quick manual

SATO RWG500 Quick Manual

Rewinder for sato barcode printer
Hide thumbs Also See for RWG500:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Guide
Rewinder for SATO Barcode Printer
R W G 5 0 0
Rewinder RWG500.
Make sure to read this operation manual and
keep it in a handy place.
DCS & Labeling Worldwide
http://www.satoworldwide.com
Introduction
Thank you for your purchase of the SATO Rewinder RWG500.
This manual helps first time users understand the basics of the
RWG500 in a short period of time.
To get the most out of the functions of the RWG500, make sure
to read this manual carefully.

Table of Contents

Safety Precautions · · · · · · · · · · · · · · · · · · · · · · · 3
Main Body and Accessories · · · · · · · · · · · · · · · · · · 6
Parts Identification · · · · · · · · · · · · · · · · · · · · · · · 7
Joint plate setting · · · · · · · · · · · · · · · · · · · · · · · · 9
First Roller Height Setting · · · · · · · · · · · · · · · · · · 14
Connection to Printer · · · · · · · · · · · · · · · · · · · · 15
Rewinding Direction · · · · · · · · · · · · · · · · · · · · 18
Direct Rewinding · · · · · · · · · · · · · · · · · · · · 20
3-Inch Paper-core Rewinding · · · · · · · · · · · · · 21
Basic Usage of the Rewinder · · · · · · · · · · · · · · · · 23
6-Inch Expansion Option · · · · · · · · · · · · · · · · · · 25
Basic Specifications · · · · · · · · · · · · · · · · · · · · · 28
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RWG500 and is the answer not in the manual?

Questions and answers

Related Manuals for SATO RWG500

Summary of Contents for SATO RWG500

  • Page 1: Table Of Contents

    This manual helps first time users understand the basics of the RWG500 in a short period of time. To get the most out of the functions of the RWG500, make sure Rewinder for SATO Barcode Printer to read this manual carefully.

  • Page 2: T H A N K Y O U F O R Y O U R P U R C H A S E O F T H E S A T O Safety Precautions

    Safety Precautions Warning In this section, safety precautions about rewinder operation are explained to ensure proper care and usage. Do not place on an unstable place Make sure to read these carefully before using your rewinder. Do not place the rewinder on an unstable place such as an unsteady table, an inclined place or a place with vibration.

  • Page 3: Main Body And Accessories

    Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. RWG500 main body This equipment generates use and can radiate radio frequency energy Joint plate and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications.

  • Page 4: Parts Identification

    Parts Identification Second roller First roller Tension arm Side Panel Control Panel Power switch Connector for AC adaptor connection Status LED CW : Clockwise winding (Face in) Earth terminal Indication LED Rewinding direction selector switch CCW : Counterclockwise winding (Face out) Indication LED Rewinding START/STOP switch Connector for printer connection...

  • Page 5: Joint Plate Setting

    Printer model name Joint plate setting GT4xxe M-84Pro Set the joint plate according to the printer model to be connected. Check the printer model displayed. SR4XX M-48Pro Loosen the screws GT4XXe M-84Pro (2 places) of the joint plate. Phillips screwdriver is necessary.
  • Page 6 Printer model Printer model CL4xxe M-5900RVe Check the printer model Check the printer model displayed. displayed. MR4xxe MT4xxe CL4xxe M-5900RVe Slide the plate so that the screws and Slide the plate so that the screws and bosses are in the position indicated bosses are in the position indicated below, then tighten the screws.

  • Page 7: First Roller Height Setting

    Printer model First Roller Height Setting CL6xxe According to the printer to be connected, adjust the first roller Check the printer model height to either upper or lower position. displayed. MR6xxe Check which of the following categories the printer to be used belongs to.

  • Page 8: Connection To Printer

    Connection to Printer P l a c e t h e f e e t o f t h e P l a c e t h e f e e t o f t h e printer (2 places) into the rewinder (2 places) into positioning holes on the the positioning holes on...

  • Page 9: Label Setting

    Label Setting This rewinder can perform 4 types of label rewinding methods by combining rewinding shaft types and winding directions. Rewinding direction : Face in / Face out Rewinding shaft : Direct Rewinding / Insert the EXT cable to 3-inch paper-core Rewinding the connector for printer Select the rewinding method according to the environment where connection on RWG 500.
  • Page 10 Rewinding Shaft Switching of Rewinding Direction Switch the Rewinding direction with the Rewinding direction selector switch on the side panel. Direct Rewinding Face in Rewinding is set as the factory setting. Control panel Side panel display Face in Rewinding (CW side) Set the label as inside or LED of CW lights up.

  • Page 11: 3-Inch Paper-Core Rewinding

    3-Inch Paper-core Rewinding Attach the provided 3-inch core adaptor to the rewinding shaft. At this time, align the locking screws to the guides (narrow- width guide and deep-groove guide) of the rewinding shaft. Insert the paper tube, then fix the label with an adhesive Guide tape, etc.

  • Page 12: Basic Usage Of The Rewinder

    Basic Usage of the Rewinder Start automatic rewinding. Operate the printer and start issuing the label. After the label has been set, rewinding of the label can be performed. Slack in the label and issuing speed are detected automatically The followings are the rewinding procedures. before performing rewinding.

  • Page 13: 6-Inch Expansion Option

    How to Install 6-Inch Expansion Option Install the optional kit correctly following the procedures shown below. To rewind the label with the width of more than 131mm, the expansion optional kit is required. Remove the cap of the second Contents of the Optional Kit roller.

  • Page 14: Basic Specifications

    Basic Specifications ø 40mm direct Rewinding, 3-inch paper-core Rewinding method Rewinding Please use the genuine label for Sato printers. Paper type Linerless label is not applicable for this rewinder. Remove the cap of the rewinding Width: 25-131mm (standard) shaft. Paper width Width: 25-180mm (when the optional kit is installed) Label thickness: 0.08 - 0.26mm...
  • Page 15 – MEMO – – MEMO –...
  • Page 16 – MEMO – DCS & Labeling Worldwide First edition 15.Oct.2004...

Table of Contents