ResMed VPAP ST Welcome Manual page 3

Positive airway pressure device

Hide thumbs Also See for VPAP ST:

Table of Contents

Available languages

Setup

1. Connect the DC plug of the power supply unit to the rear of the VPAP device.

2. Connect the power cord to the power supply unit.

3. Plug the other end of the power cord into the power outlet.

4. Connect one end of the air tubing firmly onto the air outlet.

5. Connect the assembled mask system to the free end of the air tubing.

Notes:

• For more information on assembling your mask see your mask user guide.

• Recommended masks are available on www.resmed.com on the Products page

under Service & Support.

Table of Contents

Vpap s