Ecofeedback Consumption Indicator - Miele PFD 101 Operating Instructions Manual

EcoFeedback consumption
indicator
The "Consumption" function is used for
calling up information about the water
consumption of your dishwasher (see
the "Consumption" section in the
"Settings" chapter).
The following information can be shown
on the display:
- An estimate of the consumption
before the programme sequence
- The actual consumption at the end of
the programme
- The total consumption of the
dishwasher
1. Estimated consumption
After a programme has been selected,
first the name of the programme and
then the estimated water
consumption  will appear in the display
for a few seconds.
The estimated consumption will be
shown as a bar chart. The more bars
that are visible (  ), the higher the
water consumption.
The values are influenced by the
programme, any programme options
selected, the ambient conditions and
the size of the load.
The display will change automatically
from showing the estimated
consumption to showing the time
remaining.
Caring for the environment
The estimated consumption function is
activated as standard. This function can
be deactivated, though, if preferred (see
the "Consumption" section in the
"Settings" chapter).
2. Displaying consumption
At the end of the programme, you can
call up the actual water consumption
for the programme that has just been
run.
 Confirm the message
(OK) with OK.
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the
programme that has just been run.
3. Total consumption
You can view the total consumption of
water for all previously used
programmes of your dishwasher (see
the "Consumption" section in the
"Settings" chapter).
Consumption
31