Miele@Home - Miele PFD 101 Operating Instructions Manual

Before using for the first time
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages 

Refill rinse aid may appear.
 Add salt and rinse aid if necessary
(see the "Dishwasher salt" and "Rinse
aid" sections in the "Before using for
the first time" chapter).
 Select OK to confirm the messages.
The programme selected will appear
briefly in the display and the
appropriate sensor control will be
illuminated.
Next, the estimated water consumption
may be shown for the chosen
programme for several seconds.
Then the display will show the
estimated running time for the
programme selected.
22
Refill salt and

Miele@home

Your dishwasher is equipped with an
integrated WiFi module.
To use this feature, you will need:
- A WiFi network
- A Miele networking solution, e.g. the
Miele@mobile app
- a Miele user account. The user
account can be created via the Miele
networking solutions, e.g. via the
Miele@mobile app.
The networking solution you are using
will guide you as you connect your
dishwasher to your home WiFi network.
Once your dishwasher is connected to
your WiFi network, you can use the
networking solution, for example, to
carry out the following activities:
- Call up information on the operating
status of your dishwasher
- Call up information on the
programme sequence of your
dishwasher
Connecting your dishwasher to your
WiFi network will increase energy
consumption, even when the
dishwasher is switched off.
Make sure that your WiFi network
signal strength is strong enough at
the installation site of your
dishwasher.