Cutlery Tray; Loading The 3D Multiflex Tray - Miele PFD 101 Operating Instructions Manual

Cutlery tray

See the "Loading the dishwasher"
chapter, "Loading examples" section
for examples of how to load crockery
and cutlery.
 Load the cutlery into the 3D MultiFlex
tray.

Loading the 3D MultiFlex tray

To make unloading easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
 If spoon handles do not fit between
the holders, then lay them the other
way round.
Loading the dishwasher
You can push the left insert to the
middle in order to accommodate tall
items of crockery and long stemmed
glasses in the upper basket (see "Upper
basket" chapter, "Loading the silicone
elements of the FlexCare cup rack"
section).
You can put large and long cutlery (such
as salad servers and chef's knives) in
the recessed centre part of the tray.
Arrange tall items (such as cake
slices) so that they do not block the
upper spray arm.
You can adjust the height of the right-
hand insert to create more space in the
right-hand part of the tray for larger
cutlery items or smaller pieces of
crockery.
 Pull the insert inwards by the yellow
handle and click it into place in one of
the two positions.
41