Display Of Programme Running Time; Starting The Programme - Miele PFD 101 Operating Instructions Manual

Operation
Display of programme running
time
The estimated duration of the
programme selected appears in the
display before the programme begins.
During the programme, the time left
until the end of the programme is
displayed.
Symbols appear to indicate which stage
the programme is at:

Pre-wash/Soak

Main wash

Interim rinse

Final rinse

Drying
 Finished
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the
incoming water, the reactivation cycle
of the water softener and the amount of
crockery and how soiled it is.
When a programme is selected for the
first time, the display will show the
average running time for a hot water
connection.
The running times shown in the
"Programme overview" chapter refer to
standard test loads and temperatures.
For each programme sequence, the
control module calculates the
programme running time according to
the temperature of the incoming water
and the amount of crockery.
50

Starting the programme

 Touch the Start sensor control.
Confirm the previously displayed
messages with OK.
The programme starts.
The Start sensor control lights up.
During the programme sequence, you
can use OK to display the name of the
programme that is currently running.

Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.