Ecofeedback Consumption Indicator - Miele G 7260 Operating Instructions Manual

EcoFeedback consumption in-
dicator
The Consumption indicator function is
used for calling up information about
the energy and water consumption of
your dishwasher (see "Settings – Con-
sumption indicator").
The following information can be shown
on the display:
- An estimate of the consumption be-
fore the programme sequence
- The actual consumption at the end of
the programme
- The total consumption of the dish-
washer
1. Estimated consumption
After a programme has been selected,
first the name of the programme and
after a few seconds the estimated en-
ergy consumption  and water con-
sumption  will appear in the display.
The estimated consumption will be
shown as a bar chart. The more bars
that are visible (  ), the higher the en-
ergy or water consumption.
The values are influenced by the pro-
gramme, the extras selected, the ambi-
ent conditions and the size of the load.
The display will change automatically
from showing the estimated consump-
tion to showing the time left display.
The estimated consumption function is
activated as standard. This function can
be deactivated, though, if preferred (see
"Settings – Consumption indicator").
Caring for the environment
2. Display consumption
At the end of the programme you can
call up the actual amount of energy and
water used by the programme that has
just been run.
 Confirm the
Consumption (OK)
sage with OK.
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the pro-
gramme that has just been run.
3. Total consumption
You can display the total consumption
of energy and water for all previously
used programmes of your dishwasher
(see "Settings – Information").
mes-
39