Panasonic FP7 User Manual page 50

Unit configuration
Configuration
N o t e
Sample program
50
Name
Limit alarm
High limit alarm
switch-on value
High limit alarm
switch-off value
Low limit alarm
switch-off value
Low limit alarm
switch-on value
When setting limit values, make sure the following is true:
 Low limit alarm switch-on value  Low limit alarm switch-off val-
ue
 Low limit alarm switch-off value  High limit alarm switch-off
value
 High limit alarm switch-off value  High limit alarm switch-on
value
The limit alarm function is activated on channel 0 of the analog unit, and
the desired output turns to TRUE when the specified upper or lower limit is
detected. The output is specified using the function block
FP_GET_UNIT_OFFSETS1. Please refer to the Control FPWIN Pro online
help for detailed information.
POU Header
Default Setting range
Disable Select "Enable"
1000 To apply the setting, "Limit alarm" must be
enabled.
Setting range: -31250 to +31250 (specified
1000
with a signed integer)
0
0
FP7 Thermocouple and RTD Units User's Manual