Panasonic FP7 User Manual page 28

Operation
N o t e
Power frequency
Conversion processing
E x a m p l e
28
For AFP7RTD, only the normal mode (25ms/channel) is available.
The thermocouple and RTD units use a digital filter to reduce power line
noise. For AFP7TC8, this filter is only available in normal mode
(25ms/channel). In the event of noise from the power line, we recommend
to select normal mode and to set the frequency of your power line (50Hz or
60Hz) using the "Power frequency" setting.
To speed up conversion, disable "Conversion processing" for all unused
channels.
Conversion processing is enabled for 2 channels:
 Order of conversion: channel 0channel 1channel 0channel 1...
 The conversion time for the disabled channels 2 to 7 is saved.
FP7 Thermocouple and RTD Units User's Manual