Product Details; Package Contents - CDVI BO600RH Installation Manual

INSTALLATION MANUAL
BO600RH
Horizontal retrofi t housing

Product Details

Number of 300Kg magnets
Lock section with cover
Architectural handle with fi xing cover
End caps for handle
End caps for lock section
RAL colour (option)
Cut to size
2] INFORMATION & RECOMMENDATIONS
Power Considerations
The handle is designed to house electromagnets
with a holding force of 300Kg each. These units
can be supplied by
depending upon your preferred choice (48Vdc
supplied on special request). The current required
depends on the amount of electromagnetic locks,
and the voltage chosen – please see Technical
Specifi cation, and ensure
suffi cient power to BO600RH (2500mm housing
with 2 magnetic locks) would require: PSU12/2
or ARD2/12 at 12Vdc PSU24/1 or ARD24 at 24Vdc.
Information
The electromagnets are pre-fi tted within the lock
section. The armature plates are pre-fi tted within
the architectural handle. Both sections are supplied
with end caps.

3] PACKAGE CONTENTS

Profi led handle
BO600RH
925 mm
BO600RHOPTION
925 mm
either 12Vdc or
you have allocated
Profi led handle
with end caps fi xing cover
1
1
BO600RP
925 MM
2
1
1
2
2
-
-
Wiring
Plan your
installation. We recommend a maximum distance
24Vdc of 10m from the power supply to the electromagnetic
locks (to prevent volt drop). If the distance
is greater, then make sure you have increased
the cross section of the cable to compensate.
General Advice
The 2 parts of the architectural housing are designed
to be surface mounted on the door and frame, where
they should be parallel when the door is closed.
If there is a rebate, then it will be necessary to pack out
the lower part to be parallel to the other (Aluminium
rail spacer, Ref: REO). You can also use the PRP800
(Reinforcement section) or ALMA (Aluminium Cable
tray) to reinforce the housing mounting.
Box section back-
plate
1 1
1 1
BO600RPOPTION
925 MM
2
1
1
2
2
cable routes before
Box section cover
1
1
cdvi.com
cdvigroup.com
EN
commencing
End caps
2
2
3