Product Presentation - CDVI V1SR Installation Manual

INSTALLATION MANUAL
V1SR - V3S - V3SR - V3SRB - V4S - V4S - V4SR - V4SRB - V5S - V5SR - V5SRB
Surface Mount Electromagnetic locks
Thank you for buying our products and for the confidence you placed
in our company.

1] PRODUCT PRESENTATION

180, 300, 400 or 500kg*,
Electronic protection
to eliminate back EMF.
Electromagnetic lock dimensions (L x W x D):
- V1SR = 167 x 34 x 21mm.
- V3S series = 248 x 45 x 26mm,
- V4S series = 255 x 50 x 27mm,
- V5S series = 266 x 66 x 40mm.
Armature dimensions (l x w x d):
- 180kg = 130 x 32 x 9mm,
- 300kg = 185 x 38 x 11mm,
- 400kg= 185 x 45 x 12mm,
- 500kg = 185 x 60 x 12mm.
Silent operation.
Power supply: 12/24V dc.
Power absorption:
- 12 V DC = 550mA,
- 24 V DC = 275mA.
WEEE RoHS
IP42 EC certification
2] REMINDERS AND RECOMMENDATIONS
The function of an electromagnetic lock is to ensure the locking of an access point. This document is a guide
of installation which will allow you to secure the installation according to the characteristics of the product,
the site and the environmental requirements.
cdvi.se
2
cdvigroup.com
The V3S, V4S and V5S series
with signalling are suitable for
the new regulations covering
assistance to persons with
reduced mobility.
Holding Visual
Refs
force feedback
V1SR 180 kg -
V3S
300kg
V3SR 300kg
V3SRB 300kg
V4S
400kg
V4SR 400kg
V4SRB 400kg
V5S
500kg
V5SR 500kg
V5SRB 500kg
Recommended
power supplies
ARD12 BS60
EN
Audible Moni-
Relay
feedback tored
- -
- - -
-
- - -
-
- - -
-
COLOUR CODES
BLUE ACTIVE VOLTAGE
RED LOCKED
GREEN OPEN
BLUE LOCKED
GREEN OPEN + BUZ-
ZER
* Depending on the version.