Headers & Jumpers Setup; How To Setup Jumpers; Detail Settings - Biostar P4M800-M7 A User Manual

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 H S
OW TO
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is "close", if not, that means the jumper is
"open".
Pin opened
3.2 D S
ETAIL ETTINGS
JUSBV1/JUSBV2: Power Source Headers for USB ports
JUSBV1/JUSBV2
1
Pin 1-2 close
1
Pin 2-3 close
Note:
In order to support this function "Power-on system via keyboard and mouse",
"JUSBV1/JUSBV2" jumper cap should be placed on Pin 2-3.
JUSB3/JUSB4: Front USB Headers
This motherboard provides 2 USB 2.0 headers, which allows user to
connect additional USB cable on the PC front panel, and also can be
connected with internal USB devices, like USB card reader.
2
1
JUSB3/JUSB4
P4M800-M7 & P4M800-M7 A
J
ETUP UMPERS
Pin closed
Assignment
JUSBV1: +5V for JKBMS1, JUSB1
+5V
JUSBV2: +5V for JUSB3/4.
JUSBV1: JKBMS1, JUSB1 and
+5V Standby
Voltage
JUSBV2: JUSB3/4 are powered by
Pin Assignment
1 +5V (fused)
10
3 USB-
5 USB+
7 Ground
9 Key
14
Pin1-2 closed
Description
and JUSBLAN1.
JUSBLAN1 are powered with +5V
standby voltage.
+5V standby voltage.
Pin Assignment
2 +5V (fused)
4 USB-
6 USB+
8 Ground
10 N/A