Table of Contents
Advertisement
6–Configuring RoCE
Configuring RoCE on the Adapter for Windows Server
5.
Connect a server message block (SMB) drive, run RoCE traffic, and verify
the results.
a.
b.
c.
Map an SMB drive, and then run RoCE traffic.
Launch Performance Monitor.
Select <Local computer> under Select counters from computer:.
Select Add RDMA Activity, and then select <All instances> under
Instances of selected object;.
The following figure shows the presence of RDMA traffic.
53
BC0154503-00 B
Advertisement
Table of Contents
