Contents What’s in the box ..............4 Features ................5 Front view .................5 Back view ................5 Using your DA310 mobile adapter ..........6 Troubleshooting ..............11 Specifications ..............13 Statutory information ............14 Warranty ................14...
Features Front view 1 USB 3.2 Gen 2 (10 Gbps) 2 Ethernet port USB-C port 3 USB-C cable 4 USB 3.2 Gen 2 (10 Gbps) USB-A ports Back view 5 HDMI port 6 VGA port 7 DisplayPort...
Using your DA310 mobile adapter 1. Using your fingertips, hold the bottom section of the DA310. 2. With the USB-C cable facing you, turn the top section to release the USB-C cable.
Page 7
3. Connect the USB-C cable of your DA310 to the Thunderbolt port (15W) or USB-C (DisplayPort Alt Mode, 15W or 7.5W) port on your PC. The image below shows the DA310 connected to several peripherals without an external power source. NOTE: DA310 can support only one display at any given time.
Page 8
4. The DA310 supports power delivery pass-through up to 90W when connected to the Thunderbolt or USB-C (Display Port Alt Mode) port of your PC. Power can be supplied by the USB-C power adapter or USB-C monitor with power delivery capability that supports charging feature. The following two images show DA310 connected to an external power source via USB-C power adapter or USB-C monitor.
Page 9
5. The DA310 display ports and ethernet port support power FRS (Fast Role Swap). (a) If DA310 is connected to a PC and a USB-C power adapter, and the user chooses to disconnect the USB-C power adapter from the DA310, it will switch the power source from the USB-C power adapter to the PC instantly without affecting the functionality of the display ports and ethernet port.
Page 10
6. The DA310 display MFDP USB-C NOTE: The DA310 supports only one display at a time USB-C Dual USB-A 10 Gbps 10 Gbps Video port Connect an external display or a projector. Connect an Ethernet (RJ45) cable from a Ethernet port router or a broadband modem for network or internet access.
Troubleshooting Problem Possible solutions The DA310 does not The DA310 is only compatible with the USB-C port on the work with the USB-A PC, i.e. Thunderbolt port or USB-C (DisplayPort Alt Mode) port on the PC port. Multiple displays are not The DA310 supports only single display out.
Page 12
• Please update you DA310 FW from: https://www.dell.com/support/drivers Need to connect the DA310 to your PC before update FW. Dell Display Manager Check/Update system BIOS / Graphic driver and install Dell (DDM) is not working Display Manager (DDM) Monitor application. https://www.dell.com/support/home/drivers/ driversdetails/?driverid=6WGWY...
60 Hz. On PCs that support below DisplayPort 1.3, the maximum resolution supported is 4K at 30 Hz. NOTE: The difference between DA310z & DA310u is only the manufacturer. Manufacturer for DA310z: BizLink (Kunshan) Co., Ltd. Manufacturer for DA310u: Luxshare Precision Industry Co., Ltd.
Dell system, it will follow the system warranty. For U.S. customers: This purchase and your use of this product are subject to Dell’s end user agreement, which you can find at www.dell.com/terms This document contains a binding arbitration clause.