Table of Contents
Advertisement
6–Configuring RoCE
Preparing the Ethernet Switch
66 Input TLV pkts, 99 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts, 0
Pause Rx pkts
66 Input Appln Priority TLV pkts, 99 Output Appln Priority TLV pkts, 0
Error Appln Priority TLV Pkts
7.
Configure the DCBX protocol (CEE in this example).
Dell(conf)# interface twentyFiveGigE 1/8/1
Dell(conf-if-tf-1/8/1)# protocol lldp
Dell(conf-if-tf-1/8/1-lldp)# dcbx version cee
8.
Assign a VLAN ID to the switch port to match the VLAN ID assigned to the
adapter (5).
Dell(conf)# interface vlan 5
Dell(conf-if-vl-5)# tagged twentyFiveGigE 1/8/1
Local FCOE PriorityMap is 0x0
Local ISCSI PriorityMap is 0x10
Remote ISCSI PriorityMap is 0x10
50
BC0154503-00 B
Advertisement
Table of Contents
