6–Configuring RoCE
Configuring RoCE on the Adapter for Windows Server
2.
Select Network Direct Mtu Size from the Property menu. The network
direct MTU size must be less than the jumbo packet size. In this example,
select 1024. Click OK.
3.
Verify that RoCE is enabled on the adapter using Windows PowerShell
The Get-NetAdapterRdma command lists the adapters that support
RDMA—both ports are enabled.
PS C:\Users\Administrator> Get-NetAdapterRdma
Name
-----
SLOT 4 3 Port 1
SLOT 4 3 Port 2
4.
Verify that RoCE is enabled on the host operating system using PowerShell.
The Get-NetOffloadGlobalSetting command shows NetworkDirect is
enabled.
PS C:\Users\Administrators> Get-NetOffloadGlobalSetting
ReceiveSideScaling
ReceiveSegmentCoalescing
Chimney
TaskOffload
NetworkDirect
NetworkDirectAcrossIPSubnets
PacketCoalescingFilter
InterfaceDescription
--------------------
QLogic FastLinQ QL45212...
QLogic FastLinQ QL45212...
: Enabled
: Enabled
: Disabled
: Enabled
: Enabled
: Blocked
: Disabled
52
®
.
Enabled
-------
True
True
BC0154503-00 B