Advertisement
GEAX
s.r.l.
Operations relating to the replacement of lubrication / hydraulic oils
2.2.2
First of all:
• operate when the components are not hot;
• provide a container to collect the lubricant drained from the machine and
for any leakage during the loading stage;
• wear impermeable gloves;
• work in a ventilated area;
• bear in mind that used lubricant is toxic therefore handle with care and
rinse immediately with soap and water if it comes into contact with eyes or
parts of the body;
• work in absence of open flames;
Winch gear unit scheduled lubrication operations
2.2.3
The lubricant of the winch gear unit must be replaced at a frequency shown in
tab. 2.2.3.1-2
MAIN WINCH GEAR UNIT LUBRICATION
AGIP
ROTRA MP 80W-90
AUXILIARY WINCH GEAR UNIT LUBRICATION
AGIP
ROTRA MP 80W-90
Alternatively one can consult the manufacturer manual to find equivalent lubricant
producers
Hydraulic circuit oil periodic replacement
2.2.4
For this operation refer to the manual of the JCB excavator.
Periodic replacement of the internal combustion engine lubricant
2.2.5
For this operation refer to the manual of the JCB excavator.
LUBRICATION DESCRIPTION
LUBRICATION DESCRIPTION
DRILLING MACHINE SCHEDULED MAINTENANCE
Chapter 2
API GL5
tab. 2.2.3.1
API GL5
tab. 2.2.3.2
Brevini BWF 2000
Replacement
Quantity
frequency
[c.c]
[hours]
2000
350
Brevini DW 090
Replacement
Quantity
frequency
[c.c]
[hours]
4000
150
2-4
Advertisement
