Advertisement
GEAX
s.r.l.
A+A'
B+B'
The measurements indicated in
gauge. One must not measure close to the edge (where consumption is
higher) but at a certain depth (dotted area
In the event of deviation from the above measurements, bring the values
back to the tolerance range using the relevant shims.
Tolerance
0÷1
0÷1
tab.2.5.1.2,
DRILLING MACHINE SCHEDULED MAINTENANCE
Chapter 2
[mm]
[mm]
tab.2.5.1.2
can be verified using a thickness
fig.2.5.1.1
notes
Measurement in points
1,2,3 and 4
Measurement in points
1,2,3 and 4
).
2-12
Advertisement
