Advertisement
Table of Contents
- 1 Connecting the Digital TV Tuner to the Conceptronic CM3G/P/PP
- 2 Connecting the Conceptronic CM3PVR to the TV
- 3 Recording from the Digital TV Tuner
- 4 Instant Recording (One Touch Record)
- 5 Scheduled Recording
- 6 Setting Recording Options
- 7 Quality Setting and Nicam Option
- 8 Copy Protection and Device Operation Notes
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Conceptronic CM3G
- Page 1 CM3G-CM3GP-CM3GPP Media Giant How to… Record from an external DVB-T tuner with the Conceptronic CM3G/P/PP ® Copyright 2007 by Conceptronic – All rights reserved www.conceptronic.net Page 1 of 8...
- Page 2 DVB-c (cable), DVB-s (Satellite) and DVB-t (Terrestrial) are (among others) supported. Follow the next steps to view and record digital TV channels from a digital TV tuner through your CM3G/P/PP. Step 1: Connecting the digital TV tuner to the Conceptronic CM3G/P/PP input “AV1 IN”...
- Page 3 TV tuner where the composite cable is connected to a SCART adapter. * SCART Connector Note: When using the SCART adapter from the CM3G/P/PP in combination with your digital TV tuner in order to connect the composite cable, make sure the SCART adapter is set to ‘OUTPUT’.
- Page 4 Below you see an example of how to use a pass-through TV/antenna cable from the TV out on your digital TV tuner to the TV input “IN” on the CM3G/P/PP, so you will be also able to watch and record analog TV channels on the CM3G/P/PP.
- Page 5 1. Turn on your TVDVB-T. Press twice ‘SOURCE’ button on CM3G/P/PP remote control to select “Video 1” video input. If your TVDVB-T is on then you will be able to watch digital channels through CM3G/P/PP. 2. Use the remote control from TVDVB-T to select the (digital) channel from which you want to start recording.
- Page 6 Scheduled recording You can set a scheduled recording to let the CM3G/P/PP start recording at a specified date/time. 1. Select “Scheduled recording” at the initial menu. The following image will be shown on your screen: The Scheduled Recording menu shows 5 options, which can be selected with the left and right navigation buttons (8) of the remote control: Add: Add a new scheduled recording.
- Page 7 ‘Standby’. Make sure the TVDVB-T is set to the right channel for the recording and leave it turned on. ® Copyright 2007 by Conceptronic – All rights reserved www.conceptronic.net Page 7 of 8...
- Page 8 Note: Do not use the switch on the back of the CM3G/P/PP to turn off the device, since it will not be able to turn on itself when a recording needs to be started. The device always needs to be in stand-by mode when a recording is scheduled.
Need help?
Do you have a question about the CM3G and is the answer not in the manual?
Questions and answers